[sudo-discuss] quick circuit 5000 is almost working

[Alexander Papazoglou]

Awesome!

Any response about the missing solenoid? The one they sell as a replacement
part is pricey ($210).

What ended up being the issue we were having with the steppers?

Alex


2017-08-02 1:06 GMT-07:00 Jake <jake at spaz.org>:

> after you guys left i got both X and Y axes working properly, in the
> correct
> direction, and the endstops too!  now i was even able to home it!
>
> here's the repo:
> https://github.com/sudoroom/Marlin/tree/quickcircuit
>
> marlin can be uploaded with regular arduino, it's an arduino mega 2560
>
> we still need to enter the correct values for stuff like
> DEFAULT_AXIS_STEPS_PER_UNIT
> DEFAULT_MAX_FEEDRATE
> DEFAULT_MAX_ACCELERATION
>
> although really only the first one is necessary.
>
> then we need to either find a solenoid or use this servo to do the Z axis,
> and
> configure marlin to control it appropriately from a Z command or whatever Z
> instruction gets produced by stuff like PCB2GCODE
>
> -jake
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20170802/0a64a953/attachment.html>