[sudo-discuss] sudoroom 3D printer is working!

[robb]

We haz plenty of spray adhesive for art

On Wed, Mar 21, 2018, 2:50 PM Jake <jake at spaz.org> wrote:

>
> would not Silicone Caulk make an ok adhesive?  mechanically pressing
> against
> the glass with an open-cell foam pad seems smart though to provide some
> insulation on the bottom of the heater anyway.
>
> On Wed, 21 Mar 2018, Adam wrote:
>
> > Nope, just finding a good adhesive for reattaching it is hard. I ended up
> > just using an open cell foam pad to push the header on the glass
> > mechanically.
> >
> > Only advice is to not be too aggressive and let the glue take its time to
> > release. Doingbot while warm would help.
> >
> >
> >
> > On Mar 21, 2018 1:34 PM, "Marc Juul" <marc at juul.io> wrote:
> >
> > Cool! Hey is there any reason why I can't do that end then just flip the
> > glass, clean it and re-attach the heating pad on the bottom?
> >
> > Any tips on getting the heating pad off?
> >
> > On Wed, Mar 21, 2018 at 11:34 AM, Adam <me at adammunich.com> wrote:
> >
> >> I have successfully separated the heating pad from my old Taz bed it's
> >> quite robust
> >>
> >> On Mar 21, 2018 8:10 AM, "Marc Juul" <marc at juul.io> wrote:
> >>
> >>>
> >>> On Wed, Mar 14, 2018 at 3:51 PM, Jake <jake at spaz.org> wrote:
> >>>
> >>>> I 3d printed stuff last night and it worked great.  I scraped off the
> >>>> stuff on
> >>>> the print bed and exposed the actual glass print bed!  it's still good
> >>>> except
> >>>> there are a couple of serious craters.  Not sure what to do about the
> >>>> craters,
> >>>> perhaps fill them in with caulk?  Silicone caulk sticks to glass.
> >>>>
> >>>
> >>> Yeah sorry about that. One of the craters is my fault. I was printing
> on
> >>> a really cold night with ABS and the ABS stuck so well to the glass
> and the
> >>> temperature difference in the room was so great that the ABS
> contracting as
> >>> it cooled actually took off a bit of the glass. I will try to find and
> >>> order replacement glass.
> >>>
> >>> _______________________________________________
> >>> sudo-discuss mailing list
> >>> sudo-discuss at lists.sudoroom.org
> >>> https://sudoroom.org/lists/listinfo/sudo-discuss
> >>>
> >>>
> >
> _______________________________________________
> sudo-discuss mailing list
> sudo-discuss at lists.sudoroom.org
> https://sudoroom.org/lists/listinfo/sudo-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20190602/56c89603/attachment.html>