We got a really nice 3D printer donation from someone I hope will start coming
around and join us! Welcome Scott
-jake
---------- Forwarded message ----------
Date: Tue, 25 Jul 2023 21:39:31 -0700
From: Scott Griffitts
Subject: Re: [sudo-info] 3D printer donation
Hey, Dropped off the printer with Toby and met a few folks who were excited,
skeptical, and questioning the printer. I figured I would share some info on
it.
Here is the page on the upgraded Z mod I did: https://seckit3dp.design/kit/triple-z
Here is the page for the main printer build: https://github.com/SecKit/SK-Go_SK-Mini
Here is some info on the firmware it can run: https://www.klipper3d.org/
(I think if you do some digging, you can find examples for the kinematic bed)
Here is the bed probe I used: https://coex3d.com/products/bltouch-v3-1-automatic-bed-leveling-probe
The stepper motor board used is big tree tech octopus v1.0 with TMC2209 drivers
If you have any other questions let me know :)
Also,
If you guys need volunteers or anything, let me know. I’d love to help out with really cool people like you guys.
Regards
Scott Griffitts
On Sat, 22 Jul 2023, Scott Griffitts wrote:
> Hi,
> My name is Scott. I've been in the middle of
> upgrading a Seckit SK-GO² core-XY 3D printer. I'm
> about 90% done, but have lost interest in it. The
> machine has been an absolute workhorse with its
> large build volume, but I think it is time for Oppy
> (named after the rover) to move on to a new owner
> who can utilize and attend it properly. It needs
> about 3-5 hours of work to get it running, and maybe
> 3hrs of tuning. Worst case, it is loaded with
> aluminum extrusions, hardware, stepper motors,
> linear rails, and a Pi!
> Let me know if I can donate the printer to your
> space :)
> Regards,
> Scott Griffitts_______________________________________________
sudo-discuss mailing list -- sudo-discuss@sudoroom.org
To unsubscribe send an email to sudo-discuss-leave@sudoroom.org
More options at https://sudoroom.org/lists/postorius/lists/sudo-discuss.sudoroom.org/