Yeah that type of scraper is what Peter recommended. I would have brought some if I knew you had been going at it with basically spatulas :p
Peter said they sell the scrapers for a dollar at the big dollar store on University.

On Sun, Mar 27, 2022 at 3:05 AM Patrik D'haeseleer <patrikd@gmail.com> wrote:
Googling around a bit more - seems like all the professionals recommend using a razor blade scraper with a fresh blade, and always keep the surface *wet* with window cleaner or a soap solution. Apparently keeping the surface wet makes the scraping much easier and prevents scratching the glass with the razor blade. We might want to give that a try before we go to town with power tools on our windows...

Patrik



On Sat, Mar 26, 2022 at 7:33 PM Patrik D'haeseleer <patrikd@gmail.com> wrote:
We could try the pressure washer, but I kinda doubt it will be able to handle the more recalcitrant spots.

There's a variety of rotary brushes that can be chucked into a drill, of course. A regular metal drill brush might scuff up the glass, but perhaps a brass brush wouldn't? There's also nylon drill brushes that might do the trick. Ditto for paint stripping discs for an angle grinder. I think there's some scraping tools for the oscillating multi-tools as well.

I believe latex paints are typically susceptible to heat guns and chemical paint strippers as well, of course...

Patrik

On Sat, Mar 26, 2022 at 6:47 PM Marc Juul via sudo-discuss <sudo-discuss@sudoroom.org> wrote:
I cleared the edges of about 1.1 out of 3 windows. Some parts did come off fairly easily but most did not and several areas were so difficult it's unreasonable to do more than a bit with a hand tool.

I ended up getting slightly better manual scrapers from the tool library but we really need a power tool. At least I'm personally unwilling to do more of this without one. Does anyone know which tool would be appropriate? The tool library did not have such a tool.

On Sat, Mar 26, 2022 at 12:24 AM Marc Juul <marc@juul.io> wrote:
Hi sudoers!

We had an unfortunate incident with the new protective coating on our roof where the roof windows got coated as well. It's some latex type substance and CCL tells us it isn't too difficult to get off.

Is anyone up for helping with a couple of hours of scraping tomorrow (Saturday) from 3 pm to 5 pm?

I'll bring scrapers and we'll lay down some 2x4s across the windows so people be in danger of falling through the glass.

--
marc/juul
_______________________________________________
sudo-discuss mailing list -- sudo-discuss@sudoroom.org
To unsubscribe send an email to sudo-discuss-leave@sudoroom.org
More options at https://sudoroom.org/lists/postorius/lists/sudo-discuss.sudoroom.org/