Difference between revisions of "Sparcstation"

Jump to navigation Jump to search
(Created page with "== sparcstation 5 == * at "ok" prompt, type <code>boot disk<br> username: root<br> password: sudo*room<br> </code> once its booted up, open a terminal and type <code> ifconfig le0 plumb<br> ifconfig le0 up<br> ifconfig le0 hw ether <br> ifconfig le0 <br> ifconfig le0 <br> ifconfig le0 <br> </code>")
 
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
== sparcstation 5 ==
= sparcstation 5 =
* To get the Ethernet port to work, you must enable setenv tpe-link-test? true
* The NVRAM chip's battery has been replaced similar to [https://www.reddit.com/r/retrobattlestations/s/J1PLS9AZNU the image in this reddit post]
* if it keeps trying to boot from network, try pressing STOP and A at the same time, and to fix that, at the "ok" prompt type [https://community.spiceworks.com/topic/2436891-timeout-waiting-for-arp-rarp-on-booting "setenv boot-device disk"] and "setenv diag-device disk" and "setenv tpe-link-test? true" and then "nvstore"
* at "ok" prompt, type
* at "ok" prompt, type


<code>boot disk<br>
<code>boot disk</code><br>
username: root<br>
root<br>
password: sudo*room<br>
sudo*room<br>
</code>


once its booted up, open a terminal and type
* once its booted up, open a terminal and type
<code>./netup</code>
<br>


* /netup is just this:<br>
<code>
<code>
ifconfig le0 plumb<br>
ifconfig le0 plumb<br>
ifconfig le0 100.64.64.37/22<br>
ifconfig le0 up<br>
ifconfig le0 up<br>
ifconfig le0 hw ether <br>
route add default 100.64.64.1<br>
ifconfig le0 <br>
ifconfig le0 <br>
ifconfig le0 <br>
</code>
</code>
* we the following is in /etc/resolv.conf
<code>domain jackpumpkin<br>
nameserver 8.8.8.8<br>
nameserver 8.8.4.4<br></code>
* and did this
<code>cp /etc/nsswitch.dns /etc/nsswitch.conf</code>
[https://www.unix.com/solaris/45324-configuring-tp-ethernet-sparcstation-5-solaris-8-a.html maybe this will help make these settings automatic?]
[https://sudoroom.org/lists/hyperkitty/list/sudo-discuss@sudoroom.org/thread/QAAD2R72X3X7JLLH4PJASNXSHVG6ZNQ6/ see this email thread]
[https://docs.oracle.com/cd/E19455-01/806-0916/ipconfig-13/index.html echo jackpumpkin > /etc/hostname.leo]
=== had to do this because the eeprom battery was dead ===
* [https://gist.github.com/amdprophet/e010803d581d676003a90ba36da8a269 how to configure mac address] which was written using information from amdprophet's notes & [http://www.obsolyte.com/sunFAQ/faq_nvram.html http://www.obsolyte.com/sunFAQ/faq_nvram.html]
* The actual last three bytes of the MAC address are on a sticker on the NVRAM chip and should be entered in the above instructions, both places in the instructions above must match!
* then after that, it didn't come up to the "ok" prompt anymore so I had to
[https://www.unixguide.net/sun/faq/5.49.shtml press STOP and A keys at the same time to interrupt boot]

Navigation menu