|
|
Line 99: |
Line 99: |
| | sudobot-3d.local | | | sudobot-3d.local |
| | [[sudobot-3d| 3d printer desktop computer & giant_robot_arm serial host]] | | | [[sudobot-3d| 3d printer desktop computer & giant_robot_arm serial host]] |
| | [[User:jake|jake]] | | | [[User:jake|jake]] [[User:Muxlux|Muxlux]] |
| |- | | |- |
| | 100.64.64.30 | | | 100.64.64.30 |
Revision as of 22:07, 8 December 2015
For more information about sudo room's systems in general, see Systems Administration
The sudo room network provides internal networking, internet access, wireless service, and some externally accessible devices or services. Information about the various devices in use and their configuration is available below.
peoplesopen.net
If you wish to connect to the local mesh network peoplesopen.net, then you can either connect using the peoplesopen.net wifi network, or you can connect using ethernet through the D-Link DIR-601A router on the shelf next to the main switch. Use DHCP to get a 10.0.0.0/8 IP address on the mesh network. The router will handle the meshing protocol for you and also provide you with normal Internet access.
Routing
Network Info
Internet access is via space.local, a rackmount server running Ubuntu 14.04. If you follow the ethernet cable from the LMI modem through the patch panel, this is the first box connected to it.
External
Addresses
Our public IP is 142.254.26.9 aka room.sudoroom.org.
Internal
Ranges
- Internal subnet: 192.168.0.0/16
- DHCP range: 192.168.50.1 to 192.168.200.254
Addresses
IPv4 Address
|
IPv6 Address
|
Assigned to
|
Notes
|
Who set it up?
|
192.168.42.1 / 142.254.26.9
|
fd4f:dc5d:8d1::1
|
space.local / room.sudoroom.org
|
Our gateway. Located in the sudo room server "room".
|
maxb and somebody
|
100.64.64.11
|
|
omnidoor
|
beaglebone black controlling the door
|
juul and jake
|
192.168.42.3
|
No IPv6 address
|
No host name
|
Dell PowerConnect 5324 24 port gigabit switch
|
juul
|
192.168.42.4
|
No IPv6 address
|
No host name
|
Dell PowerConnect 5448 48 port gigabit switch
|
juul
|
192.168.42.6
|
fe80::219:b9ff:fe17:821c
|
reproxy.local
|
Load balancer and reverse proxy (not yet in commission).
|
wrought
|
192.168.42.7
|
fe80::214:22ff:feb0:606
|
shell.local
|
Shell server (not yet in commission).
|
wrought
|
192.168.42.8
|
|
|
the 3d printer desktop computer
|
yar
|
192.168.42.9
|
|
BespokeBridge
|
temporary wireless bridge to LaCommuneFront for public terminals near den in upstairs mezzanine
|
wrought
|
192.168.42.10
|
|
nodeconf.local
|
The sudo mesh node configuration and build server
|
Primarily juul and maxb
|
192.168.42.12
|
|
|
Brother HL-2270DW laser printer (wifi)
|
yar
|
100.64.64.20
|
|
sudobot-3d.local
|
3d printer desktop computer & giant_robot_arm serial host
|
jake Muxlux
|
100.64.64.30
|
|
|
omniphwn asterisk telephony server
|
jake
|
100.64.64.31 through .60
|
|
|
voip telephone extensions
|
jake
|
192.168.42.22
|
Used only to build sudo mesh firmware and turned off when not in use.
|
meshbuild.local
|
sudo mesh build server
|
juul
|
192.168.42.24
|
|
ccl.local
|
The Counter Culture Labs server. Located in the sudo room server rack.
|
juul
|
192.168.42.31
|
|
hackomat.local
|
The hack-o-mat vending machine.
|
juul
|
192.168.42.42
|
|
omnidoor.local
|
Dell laptop controlling the main Omni door access.
|
juul
|
192.168.42.47
|
|
spartacus.local
|
Dell desktop proxy server, apt server, for setting up new computers
|
biged
|
192.168.42.50 - 192.168.42.254
|
|
DHCP
|
Wireless Access Points
SSID
|
Security
|
Key
|
MAC
|
IP
|
Channel
|
Location
|
Hardware
|
Who set it up?
|
sudomesh
|
open
|
n/a
|
Find Me
|
192.168.42.18
|
11
|
zip-tied near server rack
|
Ubiquiti Nanostation M2 Loco
|
juul
|
Omni Ballroom
|
open
|
n/a
|
Find Me
|
192.168.42.19
|
11
|
Ballroom near stage
|
Ubiquiti Picostation 2
|
maxb
}
|
|