Difference between revisions of "File:3d 1.jpg"

Latest revision as of 19:01, 23 December 2013

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	21:31, 11 March 2013		1,944 × 2,592 (1.61 MB)	Maximilianklein (talk \| contribs)

You cannot overwrite this file.

The following 3 pages use this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Samsung
Camera model	Galaxy Nexus
Date and time of data generation	18:52, 4 March 2013
Exposure time	29,997/500,000 sec (0.059994)
F Number	f/2.75
Lens focal length	3.43 mm
Latitude	37° 48′ 38.24″ N
Longitude	122° 16′ 4.39″ W
Altitude	7 meters above sea level
Orientation	0
Y and C positioning	Centered
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
File change date and time	18:52, 4 March 2013
Exif version	2.2
Supported Flashpix version	0
Color space	sRGB
Meaning of each component	Y Cb Cr does not exist
Image compression mode	0
Date and time of digitizing	18:52, 4 March 2013
Exposure Program	Aperture priority
APEX shutter speed	3.895
APEX aperture	2.75
APEX brightness	0
APEX exposure bias	0
Maximum land aperture	2.75 APEX (f/2.59)
Subject distance	0 meters
Metering mode	Multi-Spot
Light source	Tungsten (incandescent light)
Flash	Flash did not fire
Flash energy	0
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Custom image processing	Custom process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Scene capture type	Standard
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown
Unique image ID	OAEL01
GPS time (atomic clock)	02:53
GPS date	5 March 2013

Revision as of 21:31, 11 March 2013 (view source) Maximilianklein (talk \| contribs)	Latest revision as of 19:01, 23 December 2013 (view source) Yar (talk \| contribs) (Added to 3DPrinting category)
Line 1:	Line 1:
		[[Category:3DPrinting]]