Difference between revisions of "File:HolBeerEmbedded.jpg"
(Hol showing off his electronically controlled Beer Making Keg at the Microcircuits Hack Night.) |
|||
| Line 1: | Line 1: | ||
Hol | Hol troubleshooting his electronically controlled mash keggle at the Microcircuits Hack Night. DS18B20 sensors and a sainsmart 4x relay board extend the reach of the vanilla-flavored Arduino Duemilanove. Temperature is controlled to within 0.5F and plotted in processing. This is a bang'bang type controller, switching an AC pump and a 1000W resistive heating element on at (Tset - 0.5F) and off at (Tset + 0.5F). Upon looking at the temperature curve from room temperature up to 100 degrees, it appears 1000W is not enough power input to command the system. A second 1000W element will be added prior to the first brew. | ||
Latest revision as of 10:05, 19 June 2013
Hol troubleshooting his electronically controlled mash keggle at the Microcircuits Hack Night. DS18B20 sensors and a sainsmart 4x relay board extend the reach of the vanilla-flavored Arduino Duemilanove. Temperature is controlled to within 0.5F and plotted in processing. This is a bang'bang type controller, switching an AC pump and a 1000W resistive heating element on at (Tset - 0.5F) and off at (Tset + 0.5F). Upon looking at the temperature curve from room temperature up to 100 degrees, it appears 1000W is not enough power input to command the system. A second 1000W element will be added prior to the first brew.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 11:39, 10 April 2013 |  | 1,440 × 1,440 (593 KB) | Romyilano (talk | contribs) | Hol showing off his electronically controlled Beer Making Keg at the Microcircuits Hack Night. |
You cannot overwrite this file.
File usage
The following page uses this file:
