SK-Go² Triple-Z

From Sudo Room
Revision as of 19:45, 9 August 2023 by Andrewrgross (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

A friend dropped of an SK-Go² Triple-Z 3D printer in July of 2023. Here are the notes provided:

" Hey, Dropped off the printer with Toby and met a few folks who were excited, skeptical, and questioning the printer. I figured I would share some info on it.

Here is the page on the upgraded Z mod I did: https://seckit3dp.design/kit/triple-z

Here is the page for the main printer build: https://github.com/SecKit/SK-Go_SK-Mini

Here is some info on the firmware it can run: https://www.klipper3d.org/ (I think if you do some digging, you can find examples for the kinematic bed)

Here is the bed probe I used: https://coex3d.com/products/bltouch-v3-1-automatic-bed-leveling-probe

The stepper motor board used is big tree tech octopus v1.0 with TMC2209 drivers

If you have any other questions let me know :)

Also, If you guys need volunteers or anything, let me know. I’d love to help out with really cool people like you guys.

Regards Scott G--- "

At the time of writing this, the power supply works, the screen boots up, but the screen reports not detecting a printer.

Assembly guide: https://sites.google.com/view/seckit-wiki/sk-go-310x310x350/assembly-manual/triple-z

Retrieved from "https://sudoroom.org/mediawiki/index.php?title=SK-Go²_Triple-Z&oldid=12252"