MeshCore

MeshCore at sudoroom. See also: Radio_Wednesdays

Repeater

Info about our MeshCore repeater

title 1	title 2
Name	Sudoroom 🌚 Repeater
Device Role	Repeater
Link	see below
location	zip-tied to the huge white dish above the mesh cage
hardware	Heltec v4 from amz
provenance	Ceres Station
power source	long USB cord that plugs into power only. The USB cord's data is flaky, so when updating its firmware, use a different cord.

Maintenance Log

• Wed 3/18/26: firmware update (to 1.14 from 3/6/26) by User:Judytuna. Climbed up the ladder with computer, existing cable kept failing the flash between 2% and 80% done (failed to receive serial communication), plugged in new cable, worked. Note: to put it into flash mode, use a small screwdriver to hold down the top button, unplug to turn it off (it has no battery?), and plug in to turn it on, then release the top button.
• some Wednesday in January 2026: donation & installation by C.S. (Firemware version was at 1.11 from Nov '25)

Room Server

Info about our MeshCore room server

Name	sudoroom
Device Role	Room Server
Link	see below
location	i forgot where User:Isilva put it
hardware	Heltec V4 from amz
provenance	Ceres Station
power source	USB cord to a power brick
guest password	hello
admin password	(the typical password, lol)

Maintenance Log

• Wed 3/18/2026: Donation by C.S. and installation by User:Isilva and User:Judytuna. Flashed Room Server 1.14 firmware onto it. Initial setup. Guest password is default of hello.

Companion Devices

members with nodes

Member	Node Name	Hardware	MeshCore link
User:Judytuna	judytuna	Heltec v4	see below
User:Isilva	pending	pending	pending
[[User:]]	Example	Example