Floor

Revision as of 13:54, 11 April 2019 by Yar (talk | contribs) (→‎final: glitter proportions from video)

It is almost summer 2019, which means we are going to redo our floor!

How? We don't know yet!

Options

Sudoroom is ~1500sqft. The entire bocce ball court is ~2800sqft.

  • epoxy
  • tile
  • laminate
  • linoleum

Epoxy

things to buy

  • more nail shoes
  • really nice squeegees

prep

  • clear area
  • vacuum
  • scrape gum & shit off
  • pressure wash or mop?
  • let it dry
  • grind/mill concrete down to the clean stuff
    • acid etching w/ clean-n-etch stuff?
    • rinsing?
  • fill deep gashes w/cement or plaster or epoxy
  • box in area with wood
  • primer - soaks down, bonds with concrete (usually water based)
    • do we need the oil-stop kind? is there oil in our concrete?
  • sand broadcast to prep for self-levelling stuff?

final

Types:

  • solvent-based: doesn't like humidity, high VOC, unsafe indoors
  • water-based: much lower VOC
  • solids-based: no VOC, best but more expensive
  • are they all 2-part? A+B (resin + hardener)?

Brands:

  • Rust-O-Leum EpoxyShield (cheap at home depot, only 2 colors)
  • Muscle Gloss (very expensive)

Methods:

  • 1 base coat w/black paint, 1 top coat w/glitter? I love this video - they are using one of these products but method is probably similar for other brands
    • "normally 4.5 gallons would cover 700sqft of concrete, but sand absorbs it, you'll need 2-3x as much" (so ~9 gallons for sudo)
    • 1lb glitter per gallon of epoxy