McHawking Robot Hacking

Revision as of 14:50, 4 August 2013 by Cycon (talk | contribs) (Created page with "= !McHawking Wheelchair Robot @ Sudo Room = == Technical Details == * For all technical information please refer to the [http://www.noisebridge.net/wiki/Noise-Bot Noise-Bot ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

!McHawking Wheelchair Robot @ Sudo Room

Technical Details

For all technical information please refer to the Noise-Bot page on the Noisebridge Wiki

Network

You can SSH into !McHawking if you are physically located at Sudo Room and connected to the "sudoroom" wireless access point

IP Address: 192.168.1.5 (details on the Sudo Room Network Page)

username: mchawking
password: [redacted]

Software

Change to the "lilia" directory int he "mchawking" account's home directory ("/home/mchawking/lilia")

Execute the "controller.py" Python script ("./controller.py")

At this point you can operate !!McHawking

First set a speed setting by typing a number from 0-9 on the keyboard. "5" is a good number for getting started

Then press down and hold a key to start !McHawking moving. "i" is for forward (where "forward" means in the direction of the monitor. If you were sitting in the original seat of the wheelchair this would actually be "backward")

Retrieved from "https://sudoroom.org/mediawiki/index.php?title=McHawking_Robot_Hacking&oldid=5338"