File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 23:43, 5 November 2026 | HP-E3631A-rotary-knob-nut-removal.jpg (file) |  |
1.27 MB | Plas (talk | contribs) | Image of knob removal | 2 |
| 23:14, 5 November 2026 | HP-E3631A-screw-removal.jpg (file) |  |
1.67 MB | Plas (talk | contribs) | Image of external screw on HP-E3631A | 1 |
| 23:14, 5 November 2026 | HP-E3631A-pcb-removal-2.jpg (file) |  |
5.87 MB | Plas (talk | contribs) | Image of internals of HP-E3631A front panel | 1 |
| 23:13, 5 November 2026 | HP-E3631A-pcb-removal-1.jpg (file) |  |
1.8 MB | Plas (talk | contribs) | Image of internals of HP-E3631A front panel | 1 |
| 23:10, 5 November 2026 | HP-E3631A-cable-removal.jpg (file) |  |
2.06 MB | Plas (talk | contribs) | Image of internals of HP-E3631A front panel | 2 |
| 23:02, 5 November 2026 | HP-E3631A-bumper-removal.jpg (file) |  |
6.42 MB | Plas (talk | contribs) | Image of rubber bumper removal of HP-E3631A | 1 |
| 06:45, 4 November 2026 | Modix touchscreen control menu.jpg (file) |  |
9.37 MB | Sylkos (talk | contribs) | 1 | |
| 06:44, 4 November 2026 | Modix duet3 mainboard.jpg (file) |  |
4.01 MB | Sylkos (talk | contribs) | 1 | |
| 06:43, 4 November 2026 | Modix-printhead-controls.jpg (file) |  |
3.23 MB | Sylkos (talk | contribs) | 1 | |
| 06:41, 4 November 2026 | Modix-big-120x.jpg (file) |  |
2.98 MB | Sylkos (talk | contribs) | 1 | |
| 20:53, 3 November 2026 | Motor-controller-LED-indication.png (file) |  |
424 KB | Jerkey (talk | contribs) | 1 | |
| 20:43, 3 November 2026 | Motor-control-power-schematic.png (file) |  |
1.27 MB | Jerkey (talk | contribs) | 1 | |
| 23:00, 31 October 2026 | Revival-floor-2.png (file) |  |
154 KB | Sylkos (talk | contribs) | 1 | |
| 22:59, 31 October 2026 | Revival-basement.png (file) |  |
99 KB | Sylkos (talk | contribs) | 1 | |
| 22:58, 31 October 2026 | Revival-main-floor.png (file) |  |
173 KB | Sylkos (talk | contribs) | 1 | |
| 02:31, 8 October 2026 | 5 full shortcut.png (file) |  |
340 KB | Alessandranomaly (talk | contribs) | 1 | |
| 02:30, 8 October 2026 | 4 get contents of url.png (file) |  |
142 KB | Alessandranomaly (talk | contribs) | 1 | |
| 02:30, 8 October 2026 | 3 set variable.png (file) |  |
57 KB | Alessandranomaly (talk | contribs) | 1 | |
| 02:29, 8 October 2026 | 2 encode base64.png (file) |  |
54 KB | Alessandranomaly (talk | contribs) | 1 | |
| 02:25, 8 October 2026 | 1 text action.png (file) |  |
25 KB | Alessandranomaly (talk | contribs) | 1 | |
| 06:54, 7 October 2026 | Iphone door shortcut.jpg (file) |  |
1.28 MB | Jerkey (talk | contribs) | 1 | |
| 20:31, 2 October 2026 | Odroid-xu4.jpg (file) |  |
68 KB | Jerkey (talk | contribs) | 1 | |
| 04:30, 12 July 2026 | Disks-debian13 gnome p22t dell 2026-07-10.png (file) |  |
71 KB | Paigep (talk | contribs) | 1 | |
| 23:38, 24 June 2026 | Party 2026-06.png (file) |  |
179 KB | Arik (talk | contribs) | 1 | |
| 21:15, 1 June 2026 | Flashforge artemis.webp (file) |  |
12 KB | Jerkey (talk | contribs) | Flashforge Artemis 3d printer | 1 |
| 21:11, 1 June 2026 | Hacking signal-2026-06-01-122441 002.jpeg (file) |  |
344 KB | Jerkey (talk | contribs) | it was proprietary garbage so we hacked in by connecting directly to the mainboard serial port, 3.3v TX/RX at 115200 baud, and used the bootloader to get a root shell and reset the password to usually. Then enabled telnetd by renaming /etc/init.d/telnet to S23telnet | 1 |
| 17:40, 25 May 2026 | Party 2026-05.png (file) |  |
398 KB | Arik (talk | contribs) | 1 | |
| 03:36, 6 May 2026 | Laser cutter water pressure switch 3.jpeg (file) |  |
1.91 MB | Arik (talk | contribs) | 1 | |
| 03:35, 6 May 2026 | Laser cutter water pressure switch 2.jpeg (file) |  |
1.29 MB | Arik (talk | contribs) | 1 | |
| 04:03, 1 May 2026 | Laser cutter leaking device.jpeg (file) |  |
3.31 MB | Arik (talk | contribs) | This is the offending device that’s leaking inside the laser cutter. Water appears to drip out of it when the laser cutter (and water pump) are switched on. | 1 |
| 17:19, 29 April 2026 | Taking apart six used "geek bar pulse" vapes.jpg (file) |  |
531 KB | Judytuna (talk | contribs) | 1 | |
| 07:15, 27 April 2026 | Party 2026-04.png (file) |  |
5 KB | Arik (talk | contribs) | 1 | |
| 07:14, 27 April 2026 | Party 2026-03.png (file) |  |
108 KB | Arik (talk | contribs) | 1 | |
| 07:12, 27 April 2026 | Party 2026-02.png (file) |  |
88 KB | Arik (talk | contribs) | 1 | |
| 02:43, 27 April 2026 | ISO 7010 W004.svg (file) |  |
5 KB | Arik (talk | contribs) | 1 | |
| 02:41, 27 April 2026 | ISO 7010 W071.svg (file) |  |
11 KB | Arik (talk | contribs) | 1 | |
| 02:39, 27 April 2026 | ISO 7010 W021.svg (file) |  |
4 KB | Arik (talk | contribs) | W021 – Flammable material | 1 |
| 02:36, 27 April 2026 | ISO 7010 W001.svg (file) |  |
255 bytes | Arik (talk | contribs) | W001 – General warning sign | 1 |
| 16:34, 26 April 2026 | Crooked cut bed.png (file) |  |
63 KB | Arik (talk | contribs) | 1 | |
| 19:11, 14 April 2026 | Noisebridge-stuff-org.png (file) |  |
259 KB | Jerkey (talk | contribs) | 1 | |
| 00:52, 11 April 2026 | HoppingNightIMG20251021211914.jpg (file) |  |
11.13 MB | Peterm (talk | contribs) | 1 | |
| 04:37, 26 March 2026 | Panel actual breakers.jpg (file) |  |
213 KB | Indoorjetpacks (talk | contribs) | reencoding image | 2 |
| 04:35, 26 March 2026 | Breaker panel labels.jpg (file) |  |
89 KB | Indoorjetpacks (talk | contribs) | testing indirect image | 7 |
| 03:24, 26 March 2026 | Breaker box exterior.jpg (file) |  |
494 KB | Indoorjetpacks (talk | contribs) | 1 | |
| 03:22, 26 March 2026 | Ladder top of stage.jpg (file) |  |
650 KB | Indoorjetpacks (talk | contribs) | 1 | |
| 03:21, 26 March 2026 | Top of the stage.jpg (file) |  |
433 KB | Indoorjetpacks (talk | contribs) | 1 | |
| 03:20, 26 March 2026 | Through left door.jpg (file) |  |
831 KB | Indoorjetpacks (talk | contribs) | 1 | |
| 03:19, 26 March 2026 | Go upstairs.jpg (file) |  |
950 KB | Indoorjetpacks (talk | contribs) | 1 | |
| 07:40, 20 March 2026 | Meshcore-sudoroom.jpeg (file) |  |
96 KB | Judytuna (talk | contribs) | QR code to add the sudoroom Room Server as a contact on MeshCore. | 1 |
| 07:39, 20 March 2026 | Meshcore-repeater.jpeg (file) |  |
126 KB | Judytuna (talk | contribs) | QR code for adding the Sudoroom Repeater as a contact on MeshCore. | 1 |
