Sudo Room

Difference between revisions of "Mesh/WalkThrough"

Mesh/WalkThrough (view source)

Revision as of 22:01, 19 November 2019

1,024 bytes removed ,  22:01, 19 November 2019
deleted a big unnecessary chunk; reorganized configuration section
(deleted a big unnecessary chunk; reorganized configuration section)
Line 106: Line 106:


= Configure =
= Configure =
A freshly flashed node automatically sets its IP address to <code>172.30.0.xx</code>. You will need to configure your laptop to use the following network settings to communicate with the node:


* IP address: <code>172.30.0.10</code>
'''''If you are configuring something other than a WD MyNet N600, or firmware version 0.2.3 or earlier, follow ([[#Makenode_.28v.0.2.3_and_earlier.29|these instructions]])'''''
* Subnet mask:  <code>255.255.255.0</code>
* Gateway: <code>0.0.0.0</code>
 
Or use the commands
  sudo ip link set <eth_interface> down
  sudo ip addr add 172.30.0.10/24 dev <eth_interface>
  sudo ip link set <eth_interface> up
 
where <code><eth_interface></code> is the name of your ethernet interface found using <code>ip addr</code> (common names include <code>eth0</code>, <code>enp3s0</code>, ...)
 
See Network Configuration Guides: [https://sudoroom.org/wiki/Mesh/Network%20Configuration%20for%20Linux Linux] [https://sudoroom.org/wiki/Mesh/Network%20Configuration%20for%20MacOS%20X Mac]
 
== Autoconf (v.0.3.0) ==
'''''Note: If you installed [https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0 release 0.3.0] for myNet N600 routers, your node can be autoconfigured. You will not need to use the previous solution <code>makenode</code>, otherwise you may need to read the ([[#Makenode_.28v.0.2.3_and_earlier.29|instructions further down]])'''''


[[File:Nodeports titles.png|400px|thumb|right|Plug into port 3 to access the private network from your laptop. Port 2 connects to the public 'peoplesopen.net' network]]
[[File:Nodeports titles.png|400px|thumb|right|Plug into port 3 to access the private network from your laptop. Port 2 connects to the public 'peoplesopen.net' network]]
Line 134: Line 119:
Learn more about the [[Mesh/Network topology|network's topology here]].
Learn more about the [[Mesh/Network topology|network's topology here]].


=== Configuring the Web Dashboard ===
== Configuring the Web Dashboard ==


While connected to the ''private'' network (default <code>pplsopen-admin</code>), try connecting to the home node's web dashboard by opening a web browser and navigating to [http://172.30.0.1 172.30.0.1]
While connected to the ''private'' network (default <code>pplsopen-admin</code>), try connecting to the home node's web dashboard by opening a web browser and navigating to [http://172.30.0.1 172.30.0.1]
Line 151: Line 136:
<br clear=all>
<br clear=all>


=== Changing Admin and Root User Passwords ===
== Changing Admin and Root User Passwords ==


'''''Note: If you would like to be able to change the above wifi settings in the future, or ssh into your router, you will need to change the admin and root passwords within 12 hours.'''''
'''''Note: If you would like to be able to change the above wifi settings in the future, or ssh into your router, you will need to change the admin and root passwords within 12 hours.'''''
Retrieved from "https://sudoroom.org/wiki/Special:MobileDiff/11660"