Difference between revisions of "File:Fan-holder.jpg"

Latest revision as of 18:44, 15 June 2022

New extractor fan holder for laser cutter

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	18:44, 15 June 2022		1,122 × 1,500 (698 KB)	Kent (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 12 Pro
Exposure time	1/40 sec (0.025)
F Number	f/1.6
ISO speed rating	400
Date and time of data generation	03:40, 15 June 2022
Lens focal length	4.2 mm
Latitude	37° 50′ 58.22″ N
Longitude	122° 15′ 56.63″ W
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	15.5
File change date and time	03:40, 15 June 2022
Exposure Program	Normal program
Exif version	2.32
Date and time of digitizing	03:40, 15 June 2022
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	5.321697467488
APEX aperture	1.3561438561439
APEX brightness	0.015714145189849
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	754
DateTimeDigitized subseconds	754
Supported Flashpix version	1
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	26 mm
Scene capture type	Standard
Speed unit	Kilometers per hour
Speed of GPS receiver	0
Reference for direction of image	Magnetic direction
Direction of image	13.869684499314
Reference for bearing of destination	Magnetic direction
Bearing of destination	13.869684499314
IIM version	2