Difference between revisions of "Mesh/BATMAN-adv"

Mesh/BATMAN-adv (view source)

20 bytes removed , 01:50, 22 July 2014

change the wording

289

edits

@@ Line 3: / Line 3: @@
 = [http://downloads.open-mesh.org/batman/manpages/batctl.8.html batctl] configuration=
-These are the main functions that change the configuration or adds a monitor:
+These functions change BATMAN-adv configurations through batctl:
 * [http://downloads.open-mesh.org/batman/manpages/alfred-gpsd.html alfred-gpsd] - a used to distribute GPS location information about your batman-adv mesh network. This information could be, for example, combined with [http://www.open-mesh.org/projects/batmand/wiki/VisualizeMesh vis] to visualize your mesh topology with true geographic layout. The server fetches the information from locals nodes serving data from [http://manpages.ubuntu.com/manpages/karmic/en/man8/gpsd.8.html gpsd].
@@ Line 16: / Line 16: @@
 = [http://downloads.open-mesh.org/batman/manpages/batmand.8.html batmand] configuration =
-There functions to change the BATMAN configurations through [http://downloads.open-mesh.org/batman/manpages/batmand.8.html batmand]:
+There functions change BATMAN configurations through [http://downloads.open-mesh.org/batman/manpages/batmand.8.html batmand]:
 * s (visualization server) - Batman daemons may send their local  view  about their  single-hop  neighbors  to the vis server. It collects the information and provides data in  a  format  similar  to  [http://www.olsr.org/ OLSR's topology]  information  output.