186
edits
Difference between revisions of "Mesh/OpenWRT"
Jump to navigation
Jump to search
→OpenWRT on a VM
| (5 intermediate revisions by 2 users not shown) | |||
| Line 43: | Line 43: | ||
telnet 192.168.1.1 | telnet 192.168.1.1 | ||
(I've found that if you get an error here--like no path to host or connection refused--immediately after flashing, unplugging the router and plugging it back in is useful) | |||
If it asks for a password use 'passwd' (without the quotes). | If it asks for a password use 'passwd' (without the quotes). | ||
| Line 170: | Line 172: | ||
If you restart networking on the device after changing your lan ip address, you will be disconnected from your terminal session. Log back in using the new ip address. (You may have to manually update your ip address on your computer). | If you restart networking on the device after changing your lan ip address, you will be disconnected from your terminal session. Log back in using the new ip address. (You may have to manually update your ip address on your computer). | ||
You may need to assign yourself a new manual IP | |||
<pre> | |||
sudo ifconfig eth0 192.168.2.2 netmask 255.255.255.0 up | |||
</pre> | |||
There may also be a need to update your nameserver. | There may also be a need to update your nameserver. | ||
| Line 294: | Line 301: | ||
sudo /etc/init.d/network-manager stop | sudo /etc/init.d/network-manager stop | ||
On most linux machines (assuming your ethernet interface is eth0) setting your ip address | On most linux machines (assuming your ethernet interface is eth0) setting your ip address looks like this: | ||
sudo ifconfig eth0 192.168.1.12 netmask 255.255.255.0 up | sudo ifconfig eth0 192.168.1.12 netmask 255.255.255.0 up | ||
Afterwards do the following: | Afterwards do the following: | ||
| Line 480: | Line 486: | ||
sudo /etc/init.d/network-manager start | sudo /etc/init.d/network-manager start | ||
= OpenWRT on a VM = | |||
For some development, it might be easier to run OpenWRT on a virtual machine. This keeps you from having to worry about a bunch of wires and carrying around a router everywhere and mostly keeps you from having to deal with flashing and some other more unpleasant stuffs. | |||
OpenWRT has a page on how to setup a VM on virtualbox: | |||
[http://wiki.openwrt.org/doc/howto/virtualbox OpenWRT Virtualbox HowTo] | |||
This page has some helpful hints, especially on setting up network configurations: | |||
[http://ediy.com.my/index.php/blog/item/31-openwrt-in-virtualbox OpenWRT in VirtualBox] | |||
I've uploaded an already setup VM with a basic dev environment here: | |||
[https://github.com/max-b/sudomesh-dev-vm Pre-configured VM] | |||
The readme page should have some details on how to set it up and work around some issues. | |||