Difference between revisions of "VOIP phones"

From Sudo Room
Jump to navigation Jump to search
(Created page with "100.64.64.35/Voice_adminPage.htm admin omniphonix")
 
Line 2: Line 2:
admin
admin
omniphonix
omniphonix
http://innomedia.com/wp-content/uploads/2013/10/MTA-6328-2Re-DS.pdf
00:10:99:04:b7:ef
when you plug into its LAN port it gives you dhcp, you can go to http://192.168.251.1/Voice_adminPage.htm
http://www.dslreports.com/forum/r22145431-Unlock-I-think-I-bricked-my-Innomedia-MTA6328-2Re
1. Disconnect to WAN ( no internet).
2. Connect the gizmo via WAN to computer and login to it using user id
»192.168.1.xx/
id=user, pass=welcome
3. cut and paste the following link and press enter to Restore factory default
»192.168.1.xx/restore2.ssi
4. power cycle the gizmo and login to admin link with factory default password.
»192.168.1.xx/Voice_adminPage.htm
id=admin, pass=slapshot (for V3.0.77, V3.0.75)
5. Disable Provisioning
Menu--IP Network ---Provisioning Setting
6. Change username and password!

Revision as of 01:44, 11 November 2015

100.64.64.35/Voice_adminPage.htm admin omniphonix http://innomedia.com/wp-content/uploads/2013/10/MTA-6328-2Re-DS.pdf 00:10:99:04:b7:ef

when you plug into its LAN port it gives you dhcp, you can go to http://192.168.251.1/Voice_adminPage.htm

http://www.dslreports.com/forum/r22145431-Unlock-I-think-I-bricked-my-Innomedia-MTA6328-2Re

1. Disconnect to WAN ( no internet). 2. Connect the gizmo via WAN to computer and login to it using user id »192.168.1.xx/ id=user, pass=welcome 3. cut and paste the following link and press enter to Restore factory default »192.168.1.xx/restore2.ssi 4. power cycle the gizmo and login to admin link with factory default password. »192.168.1.xx/Voice_adminPage.htm id=admin, pass=slapshot (for V3.0.77, V3.0.75) 5. Disable Provisioning Menu--IP Network ---Provisioning Setting 6. Change username and password!