[Biohackers] Open source centrifuge!

Thu Sep 26 10:48:45 PDT 2013

I would also want to see what happens to that thin acrylic cover when a
fully laden tube ejects from the rotor at full speed. High speed
centrifuges are explosion-prone devices, and need to be tested as such.
Flying shards of acrylic are no fun...

The typical recommendation for using the dremelfuge are to hold it inside a
metal cooking pot - at least that will give you some serious protection.

Patrik

On Thu, Sep 26, 2013 at 10:17 AM, Craig Rouskey <craigrouskey at gmail.com>wrote:

> Thanks Jenny! Typically for DNA work centrifuge speeds need to be approx.
> 13000rpm/18000xg
> —
> Craig J. Rouskey
> contact at craigrouskey.com
> http://www.craigrouskey.com
>
>
> On Thu, Sep 26, 2013 at 1:15 AM, Jenny Ryan <tunabananas at gmail.com> wrote:
>
>> Via @BiologiGaragen: New open source centrifuge
>> http://t.co/otDqV44UER http://t.co/54l7f5DNOt
>> Shared via TweetCaster
>>
>
>
> _______________________________________________
> Biohackers mailing list
> Biohackers at lists.sudoroom.org
> http://lists.sudoroom.org/listinfo/biohackers
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sudoroom.org/pipermail/biohackers/attachments/20130926/fd88e3b0/attachment.html>