[sudo-discuss] 3D Printing Area has a Switch now - Network Access

[danarauz at gmail.com]

Hellos,

For those working by the 3D working area here a few notes.
1) For your convenience and to help to clear up some of the extra cables in
the vicinity a 16 port switch has been installed under the 3D Printer
table.
2) All the extra network cables removed from the 3D printing area are now
in the Server area, if you need them.
3) The red and black color electrical cable that was feeding power from the
basement has been relocated. Now the power is coming from the Server Area;
but this should be considered a TEMPORARY solution, since it should be
better to have a formal electrical outlet instead.

Thank you Sierk (he is not in this list yet), for helping; very appreciated
it.

Daniel

-- 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20150625/f4d53242/attachment.html>