[sudo-discuss] laser cutter limit switch broken

[beehappysolutions]

I’d like to learn how to cut a stencil or engrave with the robot arm - are you doing this during weekday evenings or weekends?  alice

> On Feb 22, 2016, at 5:09 PM, hol at gaskill.com wrote:
> 
> 
> Hey Adam,
> 
> I was about to cut a stencil on the laser when I noticed the cut head was bumping up against the left side and stalling the motor.  I looked and sure enough the steel leaf of the switch was twisted downward.  I was able to jog the head left while holding the limit switch down so I assume the unit needs to be replaced.  Do you know if there are any spares at sudo?  I have some from open source hardware that look similar but didn't want to attempt taking off the rail to get at it and making it worse.
> 
> Cheers,
> 
> Hol
> _______________________________________________
> sudo-discuss mailing list
> sudo-discuss at lists.sudoroom.org
> https://sudoroom.org/lists/listinfo/sudo-discuss

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20160222/5a250dea/attachment.html>