[sudo-discuss] robot engraving at sudoroom

[Jake]

Hi Alice,

I'm at sudoroom every tuesday evening starting at 7pm

you can learn how to use the robot then.  If you want to use the laser 
cutter, any time is fine but i'm not the one to show you how - maybe 
Hol or Morgan can help with that, or someone else who knows how to use the 
laser cutter.

-jake

On Mon, 22 Feb 2016, beehappysolutions wrote:

> I’d like to learn how to cut a stencil or engrave with the robot arm - are you doing this during weekday evenings or weekends?  alice
>       On Feb 22, 2016, at 5:09 PM, hol at gaskill.com wrote:
> 
> 
> Hey Adam,
> I was about to cut a stencil on the laser when I noticed the cut head was bumping up against the left side and stalling the motor.  I looked and sure enough the steel leaf of the switch was twis
> ted downward.  I was able to jog the head left while holding the limit switch down so I assume the unit needs to be replaced.  Do you know if there are any spares at sudo?  I have some from open
>  source hardware that look similar but didn't want to attempt taking off the rail to get at it and making it worse.
> Cheers,
> Hol
> _______________________________________________
> sudo-discuss mailing list
> sudo-discuss at lists.sudoroom.org
> https://sudoroom.org/lists/listinfo/sudo-discuss
> 
> 
> 
>