[sudo-discuss] laser cutter limit switch broken

[Adam]

No idea, check the other one they're probably the same
On 22 Feb 2016 7:57 pm, <hol at gaskill.com> wrote:

> normally open or normally closed?
>
> On 2016-02-22 17:10, Adam wrote:
>
> There might be a limit switch kicking around, but I haven't been to sudo
> in a long while so I'm not sure where.
>
> Jake probably has one
> On 22 Feb 2016 5:09 pm, <hol at gaskill.com> wrote:
>
>>
>> Hey Adam,
>>
>> I was about to cut a stencil on the laser when I noticed the cut head was bumping up against the left side and stalling the motor.  I looked and sure enough the steel leaf of the switch was twisted downward.  I was able to jog the head left while holding the limit switch down so I assume the unit needs to be replaced.  Do you know if there are any spares at sudo?  I have some from open source hardware that look similar but didn't want to attempt taking off the rail to get at it and making it worse.
>>
>> Cheers,
>>
>> Hol
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20160222/d6c6f77c/attachment.html>