[sudo-discuss] laser cutter limit switch broken
hol at gaskill.com
hol at gaskill.com
Mon Feb 22 22:11:07 PST 2016
10-4 thanks for the tips man
On 2016-02-22 19:58, Adam wrote:
> No idea, check the other one they're probably the same
> On 22 Feb 2016 7:57 pm, <hol at gaskill.com> wrote:
>
> normally open or normally closed?
>
> On 2016-02-22 17:10, Adam wrote:
>
> There might be a limit switch kicking around, but I haven't been to sudo in a long while so I'm not sure where.
>
> Jake probably has one
> On 22 Feb 2016 5:09 pm, <hol at gaskill.com> wrote:
>
> Hey Adam,
>
> I was about to cut a stencil on the laser when I noticed the cut head was bumping up against the left side and stalling the motor. I looked and sure enough the steel leaf of the switch was twisted downward. I was able to jog the head left while holding the limit switch down so I assume the unit needs to be replaced. Do you know if there are any spares at sudo? I have some from open source hardware that look similar but didn't want to attempt taking off the rail to get at it and making it worse.
>
> Cheers,
>
> Hol
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20160222/367ea52c/attachment.html>
More information about the sudo-discuss
mailing list