[sudo-discuss] sudoroom needs bandsaw blade plate
hol at gaskill.com
hol at gaskill.com
Tue Aug 29 15:22:51 PDT 2017
Should be easy to make on the chop saw - how does it secure to the
table?
On 2017-08-26 17:12, Jake wrote:
> i am ordering repair parts for the sudoroom bandsaw, including "bandsaw
> tires"
> (rubber rings that ride on the rollers inside the saw so the blade
> doesn't fall
> off anymore)
>
> but it's still missing the "throat plate" or "table insert" which is a
> square
> plate with a slot cut into it, and it's what holds up the material
> being cut.
>
> it needs to be 1/8" thick and 1.5" square, and then we can use the
> bandsaw to
> cut the slot into it (that's the easy part)
>
> it looks a lot like this, except it should be made of metal ideally:
> https://cdn.instructables.com/FJG/0GY9/H82U8CS5/FJG0GY9H82U8CS5.LARGE.jpg
>
> however if it's made of plastic or acrylic or something not as strong
> as metal,
> it will have to be thicker than 1/8" (except at the edges where it has
> to sit
> on the shelf)
>
> here's a video of someone making one from scratch:
> https://www.youtube.com/watch?v=hsWLQDdWlG0
>
> can someone make this plate? ideally out of aluminum, i think.
>
> -jake
> _______________________________________________
> sudo-discuss mailing list
> sudo-discuss at lists.sudoroom.org
> https://sudoroom.org/lists/listinfo/sudo-discuss
More information about the sudo-discuss
mailing list