View source for Big red laser cutter settings

{| class="wikitable sortable"
|+ Caption text
|-
! Material !! Thickness || Engrave or Thru-Cut? !! Speed (mm/sec) !! Power (%) !! Notes
|-
| Plywood ||1/8" || Thru-Cut || 5 || 30% ||  
|-
| Plywood ||1/8" || Engrave Light || 70 || 10% ||  
|-
| Thin Cotton || N/A || Thru-Cut || 50 || 50% ||  
|-
| Thin Cotton || N/A || Engrave Line || 70 || 10% ||  
|-
| Thin Cotton || N/A || Raster Engrave || 400 || 10% ||  
|-
| Card Paper || N/A || Thru-Cut || 50 || 50% ||  
|-
| Card Paper || N/A || Engrave Light || 50 || 11% || 
|-
| Card Paper || N/A || Engrave Dark || 50 || 8% || 
|-
|}