Difference between revisions of "Mesh/Flashing extender nodes"

Mesh/Flashing extender nodes (view source)

Revision as of 22:37, 7 May 2016

1,545 bytes added , 22:37, 7 May 2016

→‎Nanostation M2

Redconfetti

128

edits

@@ Line 94: / Line 94: @@
 The method outlined for the Nanostation M5 below doesn't work with the M2.
+Update the firmware to [http://dl.ubnt.com/firmwares/XN-fw/v5.6.4/XM.v5.6.4.28924.160331.1253.bin airOS for XM board firmware v5.6.4].
+Serial Connection:
+  ar7240> mtdparts default
+  ar7240> urescue
+  Setting default IP 192.168.1.20
+  Starting TFTP server...
+  Using eth0 (192.168.1.20), address: 0x81000000
+  Waiting for connection: \
+Terminal:
+  $ tftp 192.168.1.20
+  tftp> bin
+  tftp> put XM.v5.6.4.28924.160331.1253.bin
+  Sent 7537129 bytes in 20.8 seconds
+Serial Connection:
+  Receiving file from 192.168.1.10:55113
+  Received 7537129 bytes
+  Firmware Version: XM.ar7240.v5.6.4.28924.160331.1253
+  Setting U-Boot environment variables
+  Un-Protected 1 sectors
+  Erasing Flash.... done
+  Erased 1 sectors
+  Writing to Flash... done
+  Protected 1 sectors
+  Will not overwrite u-boot partition! Skipped.
+  Copying partition 'kernel' to flash memory:
+          erasing range 0x9F050000..0x9F14FFFF: ................ done
+  Erased 16 sectors
+          writing to address 0x9f050000, length 0x00100000 ...
+  Copying partition 'rootfs' to flash memory:
+          erasing range 0x9F150000..0x9F74FFFF: .............................................................................................e
+  Erased 96 sectors
+          writing to address 0x9f150000, length 0x00600000 ...
+  Firmware update complete.
+  Resetting...
+  U-Boot 1.1.4.2-s594 (Dec  5 2012 - 15:23:07)
+  Board: Ubiquiti Networks XM board (rev 1.0 e012)
+Attempting to run the same process after performing an official firmware update doesn't resolve the issue.
 == Nanostation M5 ==