Difference between revisions of "Mesh/Flashing extender nodes"

Jump to navigation Jump to search
(adding notes concerning Nanostation M2)
Line 94: Line 94:


The method outlined for the Nanostation M5 below doesn't work with the M2.
The method outlined for the Nanostation M5 below doesn't work with the M2.
Update the firmware to [http://dl.ubnt.com/firmwares/XN-fw/v5.6.4/XM.v5.6.4.28924.160331.1253.bin airOS for XM board firmware v5.6.4].
Serial Connection:
  ar7240> mtdparts default
  ar7240> urescue
  Setting default IP 192.168.1.20
  Starting TFTP server...
  Using eth0 (192.168.1.20), address: 0x81000000
  Waiting for connection: \
Terminal:
  $ tftp 192.168.1.20
  tftp> bin
  tftp> put XM.v5.6.4.28924.160331.1253.bin
  Sent 7537129 bytes in 20.8 seconds
Serial Connection:
  Receiving file from 192.168.1.10:55113
  Received 7537129 bytes
  Firmware Version: XM.ar7240.v5.6.4.28924.160331.1253
  Setting U-Boot environment variables
  Un-Protected 1 sectors
  Erasing Flash.... done
  Erased 1 sectors
  Writing to Flash... done
  Protected 1 sectors
  Will not overwrite u-boot partition! Skipped.
  Copying partition 'kernel' to flash memory:
          erasing range 0x9F050000..0x9F14FFFF: ................ done
  Erased 16 sectors
          writing to address 0x9f050000, length 0x00100000 ...
  Copying partition 'rootfs' to flash memory:
          erasing range 0x9F150000..0x9F74FFFF: .............................................................................................e
  Erased 96 sectors
          writing to address 0x9f150000, length 0x00600000 ...
 
  Firmware update complete.
 
  Resetting...
 
  U-Boot 1.1.4.2-s594 (Dec  5 2012 - 15:23:07)
 
  Board: Ubiquiti Networks XM board (rev 1.0 e012)
Attempting to run the same process after performing an official firmware update doesn't resolve the issue.


== Nanostation M5 ==
== Nanostation M5 ==
128

edits

Navigation menu