152
edits
Difference between revisions of "Monoprice Mini V1"
Created page with "thumb = Printer Status = Unknown =Slicer settings = There is no printer profile for the MP10 mini in modern slicers, so you must manually set it up. == Start G-code (sent via email from monoprice): == <pre> G28 ;(Home all axes) G21 ;(metric values) G90 ;(absolute positioning) M82 ;(set extruder to absolute mode) M107 ;(start with the fan off) M104 S[first_layer_temperature] ; set extruder temp M140 S[first_layer_bed_temperature] ; set bed temp..."
(Created page with "thumb = Printer Status = Unknown =Slicer settings = There is no printer profile for the MP10 mini in modern slicers, so you must manually set it up. == Start G-code (sent via email from monoprice): == <pre> G28 ;(Home all axes) G21 ;(metric values) G90 ;(absolute positioning) M82 ;(set extruder to absolute mode) M107 ;(start with the fan off) M104 S[first_layer_temperature] ; set extruder temp M140 S[first_layer_bed_temperature] ; set bed temp...") |
(No difference)
|