Monoprice Mini V1

Printer Status

Unknown

Slicer settings

There is no printer profile for the MP10 mini in modern slicers, so you must manually set it up.

Start G-code (sent via email from monoprice):

G28 ;(Home all axes)
G21 ;(metric values)
G90 ;(absolute positioning)
M82 ;(set extruder to absolute mode)
M107 ;(start with the fan off)
M104 S[first_layer_temperature] ; set extruder temp
M140 S[first_layer_bed_temperature] ; set bed temp
M190 S[first_layer_bed_temperature] ; wait for bed temp
M109 S[first_layer_temperature] ; wait for extruder temp
G92 E0 ;(Reset the extruder to 0)
G1 Z2.0 F1500 ; (Move Z Axis up little to prevent scratching of Heat Bed)
G1 X10 Y5 Z0.3 F1500.0 ; (Move to start position)
G1 X100 Y5  F500 E31 ; (approximately .40/1.75*distance*1.50 -- 150% over extrusion)
G1 X200 Y5 F500 E60 ;
G92 E0.0;(Zero the extruder)
G0 Z0; (Zero the Z Axis)"""

Machine Settings

• X width: 200mm
• Y width: 200mm
• Z height: 200mm

• Build plate shape – Rectangular
• Origin At Center – Not Checked
• Heated Bed – Checked

• Extruder settings:
• Nozzle size 0.4mm
• Compatible Material Diameter 1.75