Mesh/Freifunk

Freifunk is a mesh group, mesh network and mesh firmware based out of Germany with several hundred nodes.

Routing protocol

Most of the Freifunk nodes are in meshes that use OLSR. Some local Freifunk meshes use batman (I'm assuming batman-adv).

Firmware distribution

It seems like there are at least two primary points of distribution of firmwares.

• The Freifunk download site

The README.txt file has a lot of useful information.

• Meshkit - A firmware building wizard.

It actually creates the firmware based on your choices, including chipset and community profile. Really nice!

Map

Most Freifunk nodes report a bunch of information using JSON to a central map server, that reports a bunch of things, including the lattitude and longtitude.

Reporting nodes are shown on the Freifunk map.

It looks like the package freifunk-mapupdate is responsible for reporting to the central map server.

Assigning IP addresses

I'm still not sure how IP addresses are assigned in a Freifunk network. It looks like it's manual static assignment though. The [Meshkit http://meshkit.freifunk.net/ wizard] just asks for a static IP and has the IP field pre-filled with the correct subnet based on the selected community profile (e.g. 108.0.0.0 for Berlin).

Real-world IP addresses

Some of the local Freifunk meshes, such as Berlin and Leipzig, actually have real internet routable IPv4 adresses.

Anonymized IRC snippet from #freifunk on open.ircnet.net:

<Juul> is freifunk berlin really using 104.0.0.0/8 ?
<Juul> if i'm not mistaken, that's an unassigned ARIN subnet
<Juul> any reason to believe it won't be assigned in the future?
<Juul> (i'm part of a group setting up a mesh in Oakland, California, and I stumbled upon that in the berlin community profile, wondering if there's any advantage to using an unassigned range instead of just 10.0.0.0/8) 
<alice> yes
<alice> im from leipzig, a suburb of berlin, we have 104.61.... since years.. 
<alice> it IS now assigned (some months ago..) :-/
<alice> but most of freifunk netzwork is at 10.0.0.0/8.. to be seen at http://wiki.freifunk.net/IP-Netze
<alice> https://twitter.com/rundfreifunk/status/289051605779742721
<alice> 104er IPs im Bild: http://twitpic.com/3w4wlt  RT @kinolux: History repeats itself: eine IP Debatte im #freifunk IRC. #LOL

Community profiles

Freifunk has meshes in several different cities and suburbs. They keep a list of community profiles that contain settings specific to the local mesh.

Here is the Berlin profile:

1 	config 'community' 'profile'
2	    option 'name' 'Freifunk Berlin'
3	    option 'homepage' 'http://berlin.freifunk.net'
4	    option 'ssid' 'olsr.freifunk.net'
5	    option 'mesh_network' '104.0.0.0/8'
6	    option 'splash_network' '10.104.0.0/16'
7	    option 'splash_prefix' '27'
8	    option 'latitude' '52.52075'
9	    option 'longitude' '13.40948'
10	    list 'mapserver' 'http://openwifimap.net/openwifimap/'
11	    list 'mapserver' 'http://map.pberg.freifunk.net/openwifimap/'
12	
13	config 'defaults' 'wifi_device'
14	    option 'channel' '10'
15	
16	config 'defaults' 'interface'
17	    option 'netmask' '255.0.0.0'
18	
19	config 'defaults' 'olsr_interface'
20	    option 'Ip4Broadcast' '255.255.255.255'
21	    option 'HelloInterval' '3.0'
22	    option 'HelloValidityTime' '125.0'
23	    option 'TcInterval'  '2.0'
24	    option 'TcValidityTime' '500.0'
25	    option 'MidInterval' '25.0'
26	    option 'MidValidityTime'  '500.0'
27	    option 'HnaInterval' '10.0'
28	    option 'HnaValidityTime' '125.0'
29	
30	config 'defaults' 'olsrd'
31	    option 'AllowNoInt' 'yes'
32	    option 'FIBMetric' 'flat'
33	    option 'Pollrate' '0.025'
34	    option 'TcRedundancy' '2'
35	    option 'NatThreshold' '0.75'
36	    option 'LinkQualityAlgorithm' 'etx_ff'

Freifunk packages

This is a list of packages installed by the Freifunk Meshkit firmware with explanations of what they each do. Some of them are OpenWRT packages and others were made by Freifunk.

Freifunk's own packages:

• freifunk-common

Includes ff_olsr_watchdog, which in combination with olsrd-mod-watchdog restarts olsrd if olsrd freezes up. Includes ffdzero, which seems to fetch zeroes from a webserver and write then to /dev/zero (?). Includes neigh.sh which uses wget and sed and the olsrd-mod-txtinfo webserver to show some info about neighbors, and includes watch.sh which is just a shell script version of the normal watch command. source.

• freifunk-policyrouting

Special routing rules for the Freifunk network. Probably won't apply to other meshes. source.

• luci-app-meshwizard

A wizard web GUI for easily configuring the router with mesh access. I think this relies on the meshwizard package, which is just a shell script to implement the changes.

• community-profiles

A set of configuration profiles for the different local Freifunk meshes.

Web GUI extensions by Freifunk:

• luci-app-freifunk-policyrouting

Web GUI for the Freifunk routing rules. source

• luci-mod-freifunk
• luci-mod-freifunk-community
• luci-theme-freifunk-generic
• luci-app-freifunk-widgets

OLSRd packages. All of the -mod- packages are actually part of the main olsrd source tree (download openwrt olsrd source here). If you go to the lib/ directory in the olsrd source, each -mod- package has its own directory and a readme file.

• olsrd

The mesh routing protocol daemon.

• olsrd-mod-arprefresh

Looks at all received UDP packets and updates the arp cache based on these. This means fewer arp queries needed.

• olsrd-mod-dyn-gw-plain

An IPv4-only internet gateway detector that announces internet connectivity to the mesh when it is detected.

• olsrd-mod-txtinfo

Adds a telnet+http service to port 2006 that allows getting info about the mesh node.

• olsrd-mod-jsoninfo

Like mod-txtinfo but using JSON format

• olsrd-mod-nameservice

Kinda like mDNS, but specifically created for OLSR. Note that an olsrd-mod-mdns package also exists, which allows mDNS to be used on the mesh. This might be preferable, since it will interoperate with LAN and other non-mesh mDNS-capable software. It might also be dangerous, since e.g. people's mDNS-capable network printers will be announcing themselves to the mesh if no other precautions are taken.

• olsrd-mod-watchdog

Writed to a file ever n seconds if olsrd is not frozen. Allows implementation of a watchdog that restarts olsrd if it freezes.

Misc other packages:

• uhttpd

uHTTPd is a tiny single threaded HTTP server with TLS, CGI and Lua support. It is intended as a drop-in replacement for the Busybox HTTP daemon.

• libiwinfo-lua

Lua bindings for libiwinfo, a library for getting wireless interface information.

• luci-app-firewall

Firewall GUI for the web interface.

• luci-mod-admin-full

I think the initial dash means that these packages are excluded rather than included, but I could be wrong.

• -nas

Proprietary broadcom WPA authenticator.

• -ppp

Point-to-point protocol support.

• -ppp-mod-pppoe

PPP over ethernet.

• -wpad-mini

Minimal WPA-PSK authenticator.

root password

The default root password for the meshkit freifunk firmware is: admin