Network

For more information about sudo room's systems in general, see Systems Administration

The sudo room network provides internal networking, internet access, wireless service, and some externally accessible devices or services. Information about the various devices in use and their configuration is available below.

peoplesopen.net

If you wish to connect to the local mesh network peoplesopen.net, then you can either connect using the peoplesopen.net wifi network, or you can connect using ethernet through the D-Link DIR-601A router on the shelf next to the main switch. Use DHCP to get a 10.0.0.0/8 IP address on the mesh network. The router will handle the meshing protocol for you and also provide you with normal Internet access.

Routing

• Configure Interface Addresses
• Open a port to the outside world

Network Info

External Addresses Our public IP is 142.254.24.227 Internal Ranges 192.168.42.0/24 (Internal) Addresses IPv4 Address IPv6 Address Assigned to Notes Who set it up? 192.168.42.1 fd4f:dc5d:8d1::1 sudo.local Our gateway. One of the red 1u servers in the rack. maxb and somebody 192.168.42.6 fe80::219:b9ff:fe17:821c reproxy.local Load balancer and reverse proxy (not yet in commission). wrought 192.168.42.8 the 3d printer desktop computer yar 192.168.42.10 nodeconf.local The sudo mesh node configuration and build server Primarily juul and maxb 192.168.42.12 Brother HL-2270DW laser printer (wifi) yar 192.168.42.24 ccl.local The Counter Culture Labs server. Located in the sudo room server rack. juul 192.168.42.42 omnidoor.local Dell laptop controlling the main Omni door access. juul 192.168.42.50 - 192.168.42.254 DHCP Wireless Access Points SSID Security Key MAC IP Channel Location Hardware Who set it up? sudomesh open n/a Find Me 192.168.42.18 11 zip-tied near server rack Ubiquiti Nanostation M2 Loco juul Omni Ballroom open n/a Find Me 192.168.42.19 11 Ballroom near stage Ubiquiti Picostation 2 maxb }