Difference between revisions of "Network"
(→Network Info: more documentation for the router/gateway) |
|||
Line 70: | Line 70: | ||
| [[Brother_HL-2270DW| Brother HL-2270DW laser printer]] (wifi) | | [[Brother_HL-2270DW| Brother HL-2270DW laser printer]] (wifi) | ||
| [[User:Yar|yar]] | | [[User:Yar|yar]] | ||
|- | |||
| 192.168.42.22 | |||
| Used only to build sudo mesh firmware and turned off when not in use. | |||
| meshbuild.local | |||
| [[Mesh/Build server|sudo mesh build server]] | |||
| [[User:Juul|juul]] | |||
|- | |- | ||
| 192.168.42.24 | | 192.168.42.24 |
Revision as of 18:26, 28 October 2014
For more information about sudo room's systems in general, see Systems Administration
The sudo room network provides internal networking, internet access, wireless service, and some externally accessible devices or services. Information about the various devices in use and their configuration is available below.
peoplesopen.net
If you wish to connect to the local mesh network peoplesopen.net, then you can either connect using the peoplesopen.net wifi network, or you can connect using ethernet through the D-Link DIR-601A router on the shelf next to the main switch. Use DHCP to get a 10.0.0.0/8 IP address on the mesh network. The router will handle the meshing protocol for you and also provide you with normal Internet access.
Routing
Network Info
Internet access is via space.local, a red 1U server running Ubuntu 14.04. If you follow the ethernet cable from the Sonic modem through the patch panel, this is the first box connected to it. ExternalAddressesOur public IP is 142.254.26.6 aka room.sudoroom.org. InternalRanges
Addresses
Wireless Access Points
|