Difference between revisions of "Mesh/Omni Access Points"
Jump to navigation
Jump to search
(Created page with " = Current usable access points = == sudo mesh == * Location: sudo room near the server racks * Hardware: Nanostation M2 Loco == Omni Ballroom == * Location: Not sure. Pre...") |
|||
| Line 5: | Line 5: | ||
* Location: sudo room near the server racks | * Location: sudo room near the server racks | ||
* Frequency: 2.4 GHz only | |||
* Password: None | |||
* Hardware: Nanostation M2 Loco | * Hardware: Nanostation M2 Loco | ||
| Line 10: | Line 12: | ||
* Location: Not sure. Presumably the Omni Ballroom. | * Location: Not sure. Presumably the Omni Ballroom. | ||
* Frequency: 2.4 GHz only | |||
* Password: None | |||
* Hardware: Probably a Picostation 2 HP | * Hardware: Probably a Picostation 2 HP | ||
= Testing = | = Testing = | ||
Revision as of 19:45, 7 March 2015
Current usable access points
sudo mesh
- Location: sudo room near the server racks
- Frequency: 2.4 GHz only
- Password: None
- Hardware: Nanostation M2 Loco
Omni Ballroom
- Location: Not sure. Presumably the Omni Ballroom.
- Frequency: 2.4 GHz only
- Password: None
- Hardware: Probably a Picostation 2 HP
Testing
A bunch of access points are set up for testing purposes. Mostly this is for testing the Mesh firmware for People's Open Network. You probably don't want to use these unless you're helping out with testing.
peoplesopen.net
This is for normal laptops / smartphones / etc. to connect to People's Open Network. All internet-bound traffic is routed through a VPN managed by sudo mesh.
pplsopen.net-node2node
This is for mesh nodes to connect to each-other _only_. Do not connect to this if you are not a mesh node.
pplsopen.net-2
No idea.