Difference between revisions of "Big red laser cutter settings"
Jump to navigation
Jump to search
m |
Andrewrgross (talk | contribs) (Added Acetate sheet) |
||
| Line 19: | Line 19: | ||
|- | |- | ||
| Card Paper || N/A || Engrave Dark || 50 || 8% || | | Card Paper || N/A || Engrave Dark || 50 || 8% || | ||
|- | |||
| Acetate sheet || 5 Mil || Cut || 150 || 20% || | |||
|- | |- | ||
|} | |} | ||
Revision as of 14:49, 23 November 2024
| Material | Thickness | Engrave or Thru-Cut? | Speed (mm/sec) | Power (%) | Notes |
|---|---|---|---|---|---|
| Plywood | 1/8" | Thru-Cut | 5 | 30% | |
| Plywood | 1/8" | Engrave Light | 70 | 10% | |
| Thin Cotton | N/A | Thru-Cut | 50 | 50% | |
| Thin Cotton | N/A | Engrave Line | 70 | 10% | |
| Thin Cotton | N/A | Raster Engrave | 400 | 10% | |
| Card Paper | N/A | Thru-Cut | 50 | 50% | |
| Card Paper | N/A | Engrave Light | 50 | 11% | |
| Card Paper | N/A | Engrave Dark | 50 | 8% | |
| Acetate sheet | 5 Mil | Cut | 150 | 20% |