78
edits
Difference between revisions of "Big red laser cutter"
Update water leak issue
m (Fix link) |
(Update water leak issue) |
||
| Line 1: | Line 1: | ||
UPDATE: | UPDATE: May 5, 2026 | ||
'''Out of order''' -- [[Big_red_laser_cutter#Water_Leak_ADDRESS_BEFORE_USING|Water was seen leaking from the laser cutter!]] | '''Out of order''' -- [[Big_red_laser_cutter#Water_Leak_ADDRESS_BEFORE_USING|Water was seen leaking from the laser cutter!]] | ||
| Line 50: | Line 50: | ||
=== Water Leak ''ADDRESS BEFORE USING'' === | === Water Leak ''ADDRESS BEFORE USING'' === | ||
'''Update: 2026-05-05''' | |||
The offending device is a ''water pressure level switch'', we will either salvage one from a dishwasher or washing machine, or order a new one online. If you have access to either a dishwasher or washing machine, or one of these switches please let us know! | |||
'''Update: 2026-04-30''' | |||
Water was seen leaking from the front left of the machine while switched on. Upon investigation it was found to be dripping from the bottom of a device mounted inside near the back left corner. A water inlet enters the body of the laser cutter and is split, one hose goes to the offending device. This device appears to maybe be a water sensor of some sort. | Water was seen leaking from the front left of the machine while switched on. Upon investigation it was found to be dripping from the bottom of a device mounted inside near the back left corner. A water inlet enters the body of the laser cutter and is split, one hose goes to the offending device. This device appears to maybe be a water sensor of some sort. | ||
<gallery mode="slideshow"> | |||
File:Laser_cutter_leaking_device.jpeg|Pressure switch in situ | |||
File:Laser_cutter_water_pressure_switch_2.jpeg|Pressure switch removed angle 1 | |||
File:Laser_cutter_water_pressure_switch_3.jpeg|Pressure switch removed angle 2 | |||
</gallery> | |||
=== Crooked Bed === | === Crooked Bed === | ||