3DPrinting

Overview

Current Status

As of 12pm on 10/31/2013, the heater in the print head is broken. Hol is taking the lead on getting a new one.

Hardware

We currently have the following 3D printers:

3D Printer - Type A Machines Series 1

• Type A machines Series 1

Windows PC for 3D Printer

There is a Windows PC that connects to the 3D Printer.

• June 2013 - the PC that hooks up to the 3D Printer is currently fried. Follow the discussion page

Files

• smb://space/sudoroom public data/Projects/3DPrinting - Preferred place to store files
• Github: https://github.com/sudoroom/ComicsArtSudoRoom - same as Gittorious
• Gittorious - same as github https://gitorious.org/sudoroom-art-projects

Documentation

Documentation for Beginners

We currently don't have great documentation right now that covers turning on a printer, connecting it to the computer, calibration, and setting it up. We are working on that.

The current documentation / comic on the printer bed calibration is also out of date, since we have a new printer bed. Romy is compiling a 3D Printing for Beginners page on both SudoRoom and Noisebridge Wiki https://noisebridge.net/wiki/3DPrintBeginners

Overview

Quick and dirty overview

• Turn on the 3D Printer (switch is on the back right side)
• Make sure the 3D Printer is connected by USB to the desktop
• Start the program Repetier-Host http://www.repetier.com/documentation/repetier-host/
• Calibrate the printer
• Load your STL file (model of the 3D Printout)
• Slice the STL file into G-Code
• Print
• Post-Print - remove from the 3D printer bed with a razor

Gallery of Creations

• 

  RaspBerry Pi print-out

• 

  Our Office

• 

  Creation

• 

  Today I Learned Class

• 

  3D printed 2-part rocket. 65mm max diameter, 29mm motor bay, tangent ogive curve with internal 2-way structural ribs and support for airspeed sensor pitot tube at nose.

Older Documentation

Printer Calibration

Background: Original handwritten piece by Jae. This was the primary documentation for most of the early SudoRoom days and was writen down on a piece of paper. It's quite excellent.

• 

  Apocryphal Instructions page 1

• 

  Apocryphal Instructions page 2

• 

  Close up of an ancient hand-drawn diagram by our 3D printing shepherd, Jae

Fun Projects

These are humorous one off projects started for various purposes. Sometimes I think these wiki pages need a little non mean spirited humor.

3D Printer Dear Diary

• This was a humorous attempt at creating a personal teen diary for the 3D printer in hopes that more people would get engaged and participate. It didn't work. I hope I didn't offend anyone by suggesting our type a machine is a brony.