Difference between revisions of "Network"
Jump to navigation
Jump to search
Line 83: | Line 83: | ||
| 3d printer desktop computer | | 3d printer desktop computer | ||
|- | |- | ||
| 192.168.1. | | 192.168.1.21 | ||
| datasink | | datasink | ||
| The mesh storage server | | The mesh storage server |
Revision as of 21:32, 20 March 2014
For more information about sudo room's systems in general, see Systems Administration
The sudo room network provides internal networking, internet access, wireless service, and some externally accessible devices or services. Information about the various devices in use and their configuration is available below.
peoplesopen.net
If you wish to connect to the local mesh network peoplesopen.net, then you can either connect using the peoplesopen.net wifi network, or you can connect using ethernet through the D-Link DIR-601A router on the shelf next to the main switch. Use DHCP to get a 10.0.0.0/8 IP address on the mesh network. The router will handle the meshing protocol for you and also provide you with normal Internet access.
Routing
Network Info
ExternalAddresses
|
InternalRanges
Addresses
|
Wireless Access Points
SSID | Security | Key | MAC | IP | Channel | Location | Hardware |
---|---|---|---|---|---|---|---|
sudoroom | open | n/a | Find Me | 192.168.1.49 | fine me | Wire Rack above Teclo Closet | Linksys E1000 |