TAZ

Revision as of 23:56, 21 February 2018 by Jerkey (talk | contribs) (add links to firmware (can't figure out how to upload the files to the wiki))

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Taz first print 2.jpg

Sudoroom has a TAZ3 3D printer. We won it in the LulzBot 2014 printer giveaway! It can print from an SD card, with many materials:

PLA
ABS
Wood
Nylon

We are still getting familiar with this machine, but very excited to hack on it!

Manual

SetUp

Firmware

if you screw up the firmware with a weird upload or whatever, here's the factory hex file (which can be flashed using cura-lulzbot) https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex

source: http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2

3D Models

Taz Slic3r Profiles

Links

How to print your sketchup model on a lulzbot taz 3d printer nice clear how-to from open ecology
SudoKit/IndividualKits tangible kit project around 3D printing in the works :)

Retrieved from "https://sudoroom.org/mediawiki/index.php?title=TAZ&oldid=11042"