Mesh/Firmware/Flash

Revision as of 18:36, 13 May 2014 by Matt (talk | contribs) (adds first step and structure)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Instructions on flashing routers with the sudo mesh firmware, sudowrt!

Supported Devices

Ubiquiti

PicoStation

  1. Download firmware from http://build.sudomesh.org:8080/latest_images/atheros/openwrt-atheros-ubnt2-pico2-jffs2-128k.bin
    • There are additional options at http://build.sudomesh.org:8080/latest_images/atheros/ but you probably want openwrt-atheros-ubnt2-pico2-jffs2-128k.bin
      • jffs is a read/write filesystem, unlike read-only squashfs
      • These images are built by openwrt, and we think the 64k and 128k refer to block-size, but it doesn't seem to matter either way.
    • Troubleshooting: If you're trying to accessing this site at sudo room, just use the sudo room SSID wifi and not the peoplesopen.net access point. It's a long story.

NanoStation

NanoBridge