Mesh/Omni Access Points

Revision as of 19:43, 7 March 2015 by Juul (talk | contribs) (Created page with " = Current usable access points = == sudo mesh == * Location: sudo room near the server racks * Hardware: Nanostation M2 Loco == Omni Ballroom == * Location: Not sure. Pre...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Current usable access points

sudo mesh

  • Location: sudo room near the server racks
  • Hardware: Nanostation M2 Loco

Omni Ballroom

  • Location: Not sure. Presumably the Omni Ballroom.
  • Hardware: Probably a Picostation 2 HP


Testing

A bunch of access points are set up for testing purposes. Mostly this is for testing the Mesh firmware for People's Open Network. You probably don't want to use these unless you're helping out with testing.

peoplesopen.net

This is for normal laptops / smartphones / etc. to connect to People's Open Network. All internet-bound traffic is routed through a VPN managed by sudo mesh.

pplsopen.net-node2node

This is for mesh nodes to connect to each-other _only_. Do not connect to this if you are not a mesh node.

pplsopen.net-2

No idea.