128
edits
Difference between revisions of "Mesh/WalkThrough"
no edit summary
Redconfetti (talk | contribs) |
Redconfetti (talk | contribs) |
||
| Line 32: | Line 32: | ||
== Flash your Router with OpenWRT == | == Flash your Router with OpenWRT == | ||
There are different techniques for flashing each of the routers. Use the links above to the openwrt wiki and follow the instructions there to flash the router with the firmware you've downloaded. | There are different techniques for flashing each of the routers. Use the links above to the openwrt wiki and follow the instructions there to flash the router with the firmware you've downloaded. | ||
| Line 51: | Line 52: | ||
* Change method to "Manual" | * Change method to "Manual" | ||
* Click Add | * Click Add | ||
* Under "Address" type "192.168.1.10" | * Under "Address" type "192.168.1.10" (some devices will only accept from this IP) | ||
* Under "Netmask" type "255.255.255.0" | * Under "Netmask" type "255.255.255.0" | ||
* Under "Gateway" type "0.0.0.0" | * Under "Gateway" type "0.0.0.0" | ||
| Line 62: | Line 63: | ||
* Click Browse and select the firmware you downloaded | * Click Browse and select the firmware you downloaded | ||
* Click Install | * Click Install | ||
* Sometimes the interface will hang. You should get a page with a countdown of 120+ seconds. If this does not occur, reboot the router with the pin reset button depressed (as noted above), and try again. | |||
= Configuring Your OpenWRT Router to Work on the Sudomesh Network = | = Configuring Your OpenWRT Router to Work on the Sudomesh Network = | ||