73
edits
Difference between revisions of "Mesh/WalkThrough"
Add flag to Makenode section warning away Autoconf users.
Tunabananas (talk | contribs) |
(Add flag to Makenode section warning away Autoconf users.) |
||
| Line 136: | Line 136: | ||
== Makenode (v.0.2.3 and earlier) == | == Makenode (v.0.2.3 and earlier) == | ||
'''''Note: If you installed autoconfiguring [https://github.com/sudomesh/sudowrt-firmware/releases/tag/0.3.0 release 0.3.0] for myNet N600 routers, you do not need to use makenode. See the autoconf instructions above.''''' | |||
After you have successfully flashed your router with OpenWRT, you will need to use [https://github.com/sudomesh/makenode makenode] to complete the setup. makenode registers your node on the peoplesopen network, resulting in the assignment of a 64 IPv4 address subnet to your node, in addition to applying basic configuration. | After you have successfully flashed your router with OpenWRT, you will need to use [https://github.com/sudomesh/makenode makenode] to complete the setup. makenode registers your node on the peoplesopen network, resulting in the assignment of a 64 IPv4 address subnet to your node, in addition to applying basic configuration. | ||