TAZ
Sudoroom has a TAZ3 3D printer. We won it in the LulzBot 2014 printer giveaway! It can print with many materials:
- PLA
- ABS
- Wood
- Nylon
We are still getting familiar with this machine, but very excited to hack on it!
Note
cura-lulzbot slicer is installed on the computer there, and "sudoroom white ABS" filament is defined and should work. Pronterface (red icon) is the program to use to drive the printer and run the gcode generated by cura.
Don't do the SD card thing, it won't work and is terrible.
Manual
SetUp
Firmware
here's a backup of the factory firmware .hex file and "source code" for our TAZ 3: https://github.com/sudoroom/taz3d
if you screw up the firmware with a weird upload or whatever, here's the factory hex file (which can be flashed using cura-lulzbot) https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex
source: http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2
3D Models
Links
- How to print your sketchup model on a lulzbot taz 3d printer nice clear how-to from open ecology
- SudoKit/IndividualKits tangible kit project around 3D printing in the works :)