TAZ

UPDATE: Sudoroom acquired a TAZ4 in 2022 and user:Jerkey swapped the extruder out of the TAZ3 onto it, since the TAZ3 would not do a decent print and the TAZ4 looked good but was missing an exturder. The TAZ3 will be converted to solder paste dispensing only, as seen here on Hackaday

Sudoroom has a TAZ3 3D printer. We won it in the LulzBot 2014 printer giveaway! It can print from an SD card, with many materials:

• PLA
• ABS
• Wood
• Nylon

We are still getting familiar with this machine, but very excited to hack on it!

Manual

• TAZ 3.0 Printer brochure PDF
• TAZ 3.0 User Manual PDF

Hardware

• diagram of RAMBO control board

Firmware

here's a backup of the factory firmware .hex file and "source code" for our TAZ 3: https://github.com/sudoroom/taz3d

Below are links to the original firmware from the manufacturer's site, AKA the first commits in the above GitHub repo. here's the factory hex file (which can be flashed using cura-lulzbot) https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex

factory firmware source code (Marlin with configuration tweaks): http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2

3D Models

Taz Slic3r Profiles

Links

• How to print your sketchup model on a lulzbot taz 3d printer nice clear how-to from open ecology
• SudoKit/IndividualKits tangible kit project around 3D printing in the works :)