Monoprice Mini V1
Revision as of 09:05, 9 April 2025 by Paigep (talk | contribs) (Created page with "thumb = Printer Status = Unknown =Slicer settings = There is no printer profile for the MP10 mini in modern slicers, so you must manually set it up. == Start G-code (sent via email from monoprice): == <pre> G28 ;(Home all axes) G21 ;(metric values) G90 ;(absolute positioning) M82 ;(set extruder to absolute mode) M107 ;(start with the fan off) M104 S[first_layer_temperature] ; set extruder temp M140 S[first_layer_bed_temperature] ; set bed temp...")
Printer Status
Unknown
Slicer settings
There is no printer profile for the MP10 mini in modern slicers, so you must manually set it up.
Start G-code (sent via email from monoprice):
G28 ;(Home all axes) G21 ;(metric values) G90 ;(absolute positioning) M82 ;(set extruder to absolute mode) M107 ;(start with the fan off) M104 S[first_layer_temperature] ; set extruder temp M140 S[first_layer_bed_temperature] ; set bed temp M190 S[first_layer_bed_temperature] ; wait for bed temp M109 S[first_layer_temperature] ; wait for extruder temp G92 E0 ;(Reset the extruder to 0) G1 Z2.0 F1500 ; (Move Z Axis up little to prevent scratching of Heat Bed) G1 X10 Y5 Z0.3 F1500.0 ; (Move to start position) G1 X100 Y5 F500 E31 ; (approximately .40/1.75*distance*1.50 -- 150% over extrusion) G1 X200 Y5 F500 E60 ; G92 E0.0;(Zero the extruder) G0 Z0; (Zero the Z Axis)"""
Machine Settings
- X width: 200mm
- Y width: 200mm
- Z height: 200mm
- Build plate shape – Rectangular
- Origin At Center – Not Checked
- Heated Bed – Checked
- Extruder settings:
- Nozzle size 0.4mm
- Compatible Material Diameter 1.75