Difference between revisions of "3DPrinting"

From Sudo Room
Jump to navigation Jump to search
Line 11: Line 11:
  
 
''We currently don't have great documentation right now that covers turning on a printer, connecting it to the computer, calibration, and setting it up. We are working on that.''
 
''We currently don't have great documentation right now that covers turning on a printer, connecting it to the computer, calibration, and setting it up. We are working on that.''
 +
 +
== Overview ==
 +
 +
* Turn on the 3D Printer (switch is on the back right side)
 +
* Make sure the 3D Printer is connected by USB to the desktop
 +
* Start the program Repetier-Host http://www.repetier.com/documentation/repetier-host/
 +
 +
 +
= Older Documentation =
  
 
== Printer Calibration ==
 
== Printer Calibration ==

Revision as of 22:42, 7 May 2013

3dprinterfisheye02.jpg

Hardware

We currently have the following 3D printers:


Documentation

We currently don't have great documentation right now that covers turning on a printer, connecting it to the computer, calibration, and setting it up. We are working on that.

Overview


Older Documentation

Printer Calibration

Background: Original handwritten piece by Jae. This was the primary documentation for most of the early SudoRoom days and was writen down on a piece of paper. It's quite excellent.

3D Printing - page 1


Gallery of Creations