625
edits
Difference between revisions of "Mesh/Firmware/Flash"
m
→PicoStation: typo
(updates install script name) |
m (→PicoStation: typo) |
||
| Line 18: | Line 18: | ||
#* There is a small hole in the body of the router next to the ethernet port. Prepare to use a paperclip or similar small, sturdy poking device to push a 'reset button' that sits just inside this small hole. | #* There is a small hole in the body of the router next to the ethernet port. Prepare to use a paperclip or similar small, sturdy poking device to push a 'reset button' that sits just inside this small hole. | ||
#* Prepare to plug the router back in to the POE injector. You may need a friend to help. | #* Prepare to plug the router back in to the POE injector. You may need a friend to help. | ||
#* With your poking device, | #* With your poking device, hold the reset button down and plug the router back in to the POE injector. Hold the reset button until the router's green light goes to two, then starts flashing orange and red. Release the reset button when the lights flash for the second time. | ||
# Copy firmware to router using TFTP | # Copy firmware to router using TFTP | ||
#* After resetting the router, it should now be running a TFTP server at 192.168.1.20 | #* After resetting the router, it should now be running a TFTP server at 192.168.1.20 | ||