Network

For more information about sudo room's systems in general, see Systems Administration

The sudo room network provides internal networking, internet access, wireless service, and some externally accessible devices or services. Information about the various devices in use and their configuration is available below.

peoplesopen.net

If you wish to connect to the local mesh network peoplesopen.net, then you can either connect using the peoplesopen.net wifi network, or you can connect using ethernet through the D-Link DIR-601A router on the shelf next to the main switch. Use DHCP to get a 10.0.0.0/8 IP address on the mesh network. The router will handle the meshing protocol for you and also provide you with normal Internet access.

Routing

Network Info

Internet access is via space.local, a rackmount server running Ubuntu 14.04. If you follow the ethernet cable from the LMI modem through the patch panel, this is the first box connected to it.

External

Addresses

Our public IP is 142.254.26.9 aka room.sudoroom.org.

Internal

Ranges

  • Internal subnet: 192.168.0.0/16
  • DHCP range: 192.168.50.1 to 192.168.200.254

Addresses

IPv4 Address IPv6 Address Assigned to Notes Who set it up?
192.168.42.1 / 142.254.26.9 fd4f:dc5d:8d1::1 space.local / room.sudoroom.org Our gateway. Located in the sudo room server "room". maxb and somebody
192.168.42.3 No IPv6 address No host name Dell PowerConnect 5324 24 port gigabit switch juul
192.168.42.4 No IPv6 address No host name Dell PowerConnect 5448 48 port gigabit switch juul
192.168.42.6 fe80::219:b9ff:fe17:821c reproxy.local Load balancer and reverse proxy (not yet in commission). wrought
192.168.42.7 fe80::214:22ff:feb0:606 shell.local Shell server (not yet in commission). wrought
192.168.42.8 the 3d printer desktop computer yar
192.168.42.10 nodeconf.local The sudo mesh node configuration and build server Primarily juul and maxb
192.168.42.12 Brother HL-2270DW laser printer (wifi) yar
192.168.42.22 Used only to build sudo mesh firmware and turned off when not in use. meshbuild.local sudo mesh build server juul
192.168.42.24 ccl.local The Counter Culture Labs server. Located in the sudo room server rack. juul
192.168.42.31 hackomat.local The hack-o-mat vending machine. juul
192.168.42.42 omnidoor.local Dell laptop controlling the main Omni door access. juul
192.168.42.47 spartacus.local Dell desktop proxy server, apt server, for setting up new computers biged
192.168.42.50 -
192.168.42.254
DHCP

Wireless Access Points

SSID Security Key MAC IP Channel Location Hardware Who set it up?
sudomesh open n/a Find Me 192.168.42.18 11 zip-tied near server rack Ubiquiti Nanostation M2 Loco juul
Omni Ballroom open n/a Find Me 192.168.42.19 11 Ballroom near stage Ubiquiti Picostation 2 maxb

}