From Sudo Room
Revision as of 22:30, 19 February 2019 by Jerkey (talk | contribs) (add diagram of hardware board)
Jump to navigation Jump to search
Taz first print 2.jpg

Sudoroom has a TAZ3 3D printer. We won it in the LulzBot 2014 printer giveaway! It can print from an SD card, with many materials:

  • PLA
  • ABS
  • Wood
  • Nylon

We are still getting familiar with this machine, but very excited to hack on it!




here's a backup of the factory firmware .hex file and "source code" for our TAZ 3: https://github.com/sudoroom/taz3d

Below are links to the original firmware from the manufacturer's site, AKA the first commits in the above GitHub repo. here's the factory hex file (which can be flashed using cura-lulzbot) https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex

factory firmware source code (Marlin with configuration tweaks): http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2

3D Models

Taz Slic3r Profiles